Printing on fabric is so much fun and you
get to show off your work everywhere you go with this simple tote bag project.
This project is designed to show you how to make a simple foam printing block and
how to print a seamless repeat print, I have provided an artwork for you to use
but you can of course use your own images to create a design. Please read
through the instructions before you start so you are familiar with what you have
to do and practice your print on a piece of scrap fabric before you start on
your final project.
Top Tips
- You can use normal acrylic paints to print on fabric, mix with fabric medium 50/50 and they will be permanent and soft on the fabric once set with an iron.Acrylic blocks are available form craft shops in lots of sizes or you can find some companies will cut them to size for you, ebay is a good starting point. You can use wooden blocks or even old plate mats as long as its firm and flat- its just easier to see through acrylic to line up your prints
- Make sure you clean your block every few prints with a cloth or babywipes, this will stop the build of paint and make cleaner prints.
- You need a nice flat surface clear of clutter, remember to put down newspaper or table covering to protect it.
You
will need…..
Acrylic block size 6”x6”square at least 3mm thick
Foam sheet (sticky back preferable) size A5
or A4
Craft knife
Fabric paint
Sponge roller & sponges
Plain tote bag
Scrap fabric for practice
Masking tape
I’ve
provided……
The artwork, as a pdf template. Download
here and print out before you start.
Step by step…..
1.
Stick your foam sheet to the
surface of the acrylic block, take care not to press to hard onto foam as it
marks easily.
2.
Print out the design and draw
onto tracing paper using a soft pencil.
3.
Transfer the design onto your
foam by placing the tracing paper upside down and lightly rubbing over the
lines with your fingers.
4.
Using a sharp craft knife cut
out the design and carefully peel away the excess foam. To get the detail on
the wings and leaves use a sharp pencil and press firmly into the foam drawing
the lines, these will appear as white lines in the final print.
5.
Mix your paint to the colours
you are going to use and prepare your printing surface and place a piece of
newspaper inside your bag to stop the paint coming through to the other side.
6.
Use your masking tape to create
a border around the edge of the bag and to stick bag down so it doenst move
during printing, use extra tape at the top of the bag to protect the handles.
7.
When you are ready to print use
a sponge roller or sponge to apply a thin, even coat of paint to your block,
use a cloth to remove any excess paint on the edges of the block. Place the
block face down onto the fabric, start in the centre overlapping the bottom
edge a little. Press firmly on the back of the block. Carefully peel the block
of the fabric to reveal the print, load the block with more paint and repeat
the printing process lining up print by looking through the acrylic block.
8.
For an interesting design
feature, for just one of the prints change the colour of the bird. Clean off
all the original colour from the bird first with a cloth then load up the paint
in the same way but with 2 different sponges.
9.
Once you have covered the whole
surface of the bag use a paint brush to touch up any areas that need it and
allow to dry. Carfully remover the masking tape to reveal a nicely framed print
with clean edges, iron on a high setting to set the paint and you bag is finished!
Now show it off !
TROUBLE SHOOTING
·
Egdes of print bleeding out –
too much paint
·
Image faint – not enough paint
·
Mess marks all over fabric- edges
or block need cleaning
·
Image over lap – you have not
lined up the prints correctly, go with it, it could create a whole new design!
·
It looks a mess – embrace imperfections
that’s the nature of hand printing and just have fun!
The main thing is to have fun, play and learn as you go!
Happy printing
Jenny
some links to credit me if your are going to share
https://twitter.com/jennymccabe
http://pinterest.com/cooandco/boards/
https://www.facebook.com/www.cooandco.co.uk
EXTRAS- here are a few links to where I buy stuff from
www.handprinted.co.uk - great for everything handprinted!
Ebay is a great place to look for acrylic sheets- here is a good company
some links to credit me if your are going to share
http://pinterest.com/cooandco/boards/
https://www.facebook.com/www.cooandco.co.uk
EXTRAS- here are a few links to where I buy stuff from
www.handprinted.co.uk - great for everything handprinted!
Ebay is a great place to look for acrylic sheets- here is a good company
Ebay again great for bags but if you want to buy more than one - Clever baggers are great
