Homemade screenprints

This is a great way to try out screen printing, with practice you can get a lovely clear print each time, its great for a repeat design and with care your screen will last a while.

The basic idea is that you paint on your design onto the screen with the drawing fluid, coat the screen in a thicker screen filler, once its all dry you wash out the drawing fluid, leaving your design as a permanent stencil in the screen.

You can use any size hoop but 10” is a good working size, the best fabric to make your screen from is a very fine nylon mesh, look for net curtain fabric or voile in your local fabric shop, you can buy screen printing mesh which is perfect from screen printing specialists.

The screen drawing fluid & screen filler are available for any good art shop and last a long time and will make many screens, they come in a few different big name brands – I prefer the speedball ones as they are more familiar to me but take advise from others and your art shop.

Fabric paints come in many different brands- I always use acrylic paints mixed with fabric medium- just so I can use what’s already in my studio and to have more colour choice- again take advise form others and your art shop.

You can improvise your design but it may be helpful to have it drawn out first so you can trace it onto fabric, this will help you get the sizing right and play with your ideas before you commit it to the screen, for a 10” hoop you art work needs to be no bigger than 6”x 6”.

Practice- practice- practice- always except your first few screens not to work very well, it’s the only way to learn – it’s a tricky process and it will be trial and error till you get it right. (it took me 3 attempts to perfect the screen in the tutorial! Image to thin then to messy, then perfect!)

Right here we go- good luck

You will need

Embroidery hoop 10” or larger

Fine mesh nylon fabric

Fabric for printing on

Artwork

Screen drawing fluid

Screen filler

Paintbrush

Old credit card

Scissors

Parcel tape

Fabric paint

Hair dryer (optional)

Iron

 

Step by step

1- First you will need to cut your mesh slightly bigger than your hoop and stretch it over, tightening the hoop as you stretch, until you have a drum tight screen. 

 

2- Now you can paint your design onto the screen using the ‘screen drawing fluid’ this has a runny PVA type of consistency, take care not to drip it any where on your screen, you need to achieve a good solid line for your design – too thin and it wont work- practice makes perfect. You can draw your design onto the fabric in pencil or trace it directly from an image underneath- make sure you screen is mesh side up when you paint your design on. Allow it to dry fully, you can use a hairdryer on low heat if necessary. This should take 5-10mins.

 

3- Once your design is dry you can coat your screen in the ‘screen filler’. Do this with a credit card or squeegee if you have one. Pour a blob on the card and drag it across the your screen covering the surface in a thin even coat, take care not to over work this process as the drawing fluid will start to dissolve- one or two quick smooth scraping across the screen should be enough ( practice –practice – practice) allow to dry fully, use a hair dryer in you like. This should take 5-15mins.

 

4- Once the filler is completely dry you need to wash out the drawing fluid under running water. Allow the water to run over both sides of the screen and after a few second you should see the blue drawing fluid start to disappear, you may need to rub gently in some areas – be careful as to much rubbing with ruin screen. Hold it up to the light to check its clear- the edges of your design should be clearly defined and clear of both the drawing fluid and filler. Once its clear allow to dry.

 

5- Prepare your screen for printing by taping all the edges so no extra ink can get through to the fabric. I use parcel tape as its water proof and easy to remove- but masking tape would do too.

 

6-Lay out your ironed fabric on a clear protected surface ready to print, lay your screen onto the fabric where your design is to go, place a generous blob of paint above your design on the screen and use your credit card to smoothly scrape the paint across the design, pushing the paint through the screen 2 or 3 passes will be enough. Carefully lift the screen off the fabric and allow paint to dry.

 

7-If your design is repeated, use a hair dryer to dry the first print then place the screen on the fabric where the next print is going and repeat until you fabric is covered. Always iron your finished fabric to set the fabric paint.

Never allow the paint to dry in your screen, wash is immediately after you have finished printing- if you are doing a large piece of fabric with a repeat design you may need to stop half way through and wash your screen (make sure its dry before you start printing again)

 

I have made my fabric into a simple zipper purse as an example, but you can make anything you want, the possibilities are endless!

I hope this has been a helpful tutorial- if you have any questions just get in touch

Id love to see what you do and feel free to spread the word about this via pintrest of facebook or any other way!

Happy printing

Jenny

some links if your are going to share

https://twitter.com/jennymccabe
http://pinterest.com/cooandco/boards/
https://www.facebook.com/www.cooandco.co.uk

EXTRAS- here are a few links to where I buy stuff from
www.handprinted.co.uk - great for everything handprinted!
the fabric I used is 32T mesh 1/2 metre- £4.50
the drawing fluid (big pot lasts for ages)
Filler - (big pot - lasts for ages)

ideas update

Ok so once again Ive been a bit absent from cyberspace! sorry!
Ive been busy as usual panicing, procrastinating and prattling!!

I have made a few new owl brooches this week, ready for a gallery that has requested some for xmas, also need a few more  in my etsy shop. I enjoyed it very much, I hadnt realised I needed a bit of familiar making...let your hands do the thinking and give the brain a rest!

I wanted to run a few ideas by you guys and get some feedback/tips.

Ive been going on about this new shop idea for a while and I have finally figured out a way to sort it in my mind! Im now thinking about it as a day job! a way of bringing in a bit more income while still being creative, but also leaving my own art practice untouched, so I can continue to experiment and make one off pieces without the worry of whether they will sell.

so here you go......I want to start a new etsy & folksy shop and a new blog dedicated to it called Cinnamon Girl (maybe) and it will be selling hand screen printed homewares, t-shirts and fabric with my simple designs on.....here is a mock up of some of my early design ideas.

what do you think?? I got a few more design ideas but they all follow the same basic idea, tasteful but simple generic images , grasses and herbs etc.
Ive got a few more kooky ideas for kids t-shirts and baby grows but still one color graphicy & tatseful...
Im hoping if they are popular it would fund using screen printing within my own work as its a medium Id love to experiment more with.......
I wonder what you all think about these ideas, Ive saved enough money to buy all the equipment and a few materials to print on , I plan to purchase this all next week!! and teach myself how to expose the screens at home....(I have done this before , but not for a long time and not at home)
Im hoping to open the shop by 6th of November! and book on a few local craft fairs for early December....if nothing else I know my family will love them as xmas presents so in a way that lessens the element of risk!!!
Id love your feedback on these ideas and any tips !!

on another note , I have a great artists interview lined up for posting at the weekend! wonderful work and insightful into how others work....watch this space

xxx jenny